Jump to content
Fly Tying

Capt Bob LeMay

core_group_3
  • Content Count

    2,392
  • Joined

  • Last visited

Posts posted by Capt Bob LeMay


  1. Passed away at age 76... say it ain't so.   This hits a bit close to home - for those not aware he was  a dedicated saltwater fly angler when he wasn't entertaining, with tarpon at the top of the list...  I never met him, or had the pleasure of fishing with him but we're close enough in age for me to remember his very first album we he was working in the Keys - all those  years ago.... The title was right on the money... "A white sport coat - and a pink crustacean"  

    Guess radio stations will be playing lots of his songs now - for a while.  Hope they play the early songs...


  2. Haven't waded for bonefish in years - but when I did... it was always super minimalist... Pockets empty, except for a folding knife, key to my vehicle on a lanyard around my neck as well as a pair of nippers for leaders, a pair of forceps (to act in lieu of pliers) clipped to a shirt pocket and allowed to hang.... All of the few flies with me, as well as a few coiled leaders in a ziplock baggie up under my hat... 

    The real item I'd impart to anyone wading the tropics - is foot protection and sun protection... I always wore long lightweight trousers and a long sleeved shirt with a high rated sunscreen on any skin showing (but that was actually not enough.. these days I get to see my dermatologist, and his scalpel every three months...).  Here's a pic of my daily face setup...

    8m2KVXN.jpg

    and you can add sungloves as well... 

    Any kind of old tennis shoe will do for foot protection - or you can spend a few bucks and get something designed as a "flats boot"... Whatever you choose make sure it's not too tight - and has a good puncture proof sole... Be very wary of any cuts or abrasions in tropic salt or brackish waters...  If any occur - get to your ER without delay and ask them to check for "vibrio" a bacteria that can ruin your day in short order if neglected (the press call it "flesh eating" bacteria..).  Catch it early and no problem at all - delay a day or two, give it a head start and you could lose a limb - or your life.. 

    Sorry for the bad news - but I have lots of anglers that have never been exposed to tropical sun and some of the things that go with it - so I tend to preach about it.

    Me?  I known eight or nine over the years that went down from melanoma - that stuff just isn't funny at all...


  3. Young men everywhere - aren't exactly geniuses and all of us were hard wired to be the first one in the cave with the bear in it - all those years ago... It's not an accident that the Marine Corps always has their share of 17 year olds wanting to join up... 


  4. As someone that's been tracking hurricanes for many,  many years - here's an observation or two for those watching the current, soon to be hurricane, coming our way... In general,  the storm surge along the Gulf coast is much higher than it would be along the Atlantic coast (the difference is due to the shallow nature of the Gulf shorelines...).   Secondly,  those of us along the Atlantic side of Florida have a lot more warning about an approaching hurricane than you get with a something that brews up out of the Yucatan if you're south of Tampa... Southwest Florida can get  a  big hurricane very quickly if it starts up in the Yucatan area.   In less than two days it can brew up and be on you - particularly towards the end of the hurricane season... Although the storm is not aimed my way - it will still cause some bad weather -even on the Atlantic side as it heads NE.. 

    Now, like always, we'll still have to wait and see what it actually does... Not a coincidence at all that for years they were named after women... Lastly for anyone contemplating a home purchase - anywhere along the northern gulf coast - all the way across to Texas here's one more small detail to remember... Up there builders follow the Southern Building code - which specifies a roof that will withstand a 90 mile an hour wind force... Down here in south Florida our code requires a 140 mile an hour standard....


  5. Black, according to one of my wholesalers is always difficult to do properly and end up with a  solid, colorfast, result.  Their routine started out with orange dye, followed by black..  instead of red or brown.

    Years ago when I was filling lots of orders for fly shops, black tarpon flies (or patterns that had some measure of dyed black feathers, various different types of hair, etc were commonplace…).

    One look at the dye transferred to my fingers showed just how “colorfast” stuff dyed black natural materials were…


  6. In the backcountry of the Everglades most of our tactics (and gear, both spin and fly) would be very familiar to anyone that fished for bass… But when you add tarpon to the mix - things change… Big or small every tarpon is a distinct individual and no two tarpon behave the same when hooked.  At night we’re using relatively light gear, an 8 or 9wt.  For babies, fish less than 10lb,  we’ll use rods all the down to a 5wt.  We only break out the heavy gear when we’re faced with the big girls…

     

    One other big difference is that along the coast this time of year many of the fish we hook have sharks after them the moment you’re fighting them to the skiff - where most will be released if possible.


  7. We fished the falling tide on Sunday and Monday nights this week and found small to medium tarpon in both docklights and up under bridges.  Since I'm still in the break-in period with a new motor, the Sunday was with a buddy - the Monday night was a charter.   That first night we jumped five or six fish, getting two to the boat for a release - the remainder jumped off in fine fashion.  We alternated between spinning gear with lures (mostly DOA shrimp) and fly gear.  I actually got to do a bit fishing myself for a change.  Here's a pic or two of one fired up small tarpon, about 20 to 25lbs and this old guy enjoying the ride...

     

    WFnjrfT.jpg

    with a 9wt rod (TFO, Mangrove Coast), an old Billy Pate reel, and a hooked up fish I was enjoying the night...

    yqzMEIo.jpg

    first time to the boat after a few minutes of slugging it out

    qZF2cL6.jpg

    second time to the boat, two or three more times and I was finally able to leader him for the release... Here's the pattern that fish ate... I call it "something shrimpy" since it's not exactly a shrimp pattern at all... 

    Bw1j3Wn.jpg

     

    The second night we found even more tarpon - but not one of them interested in anything we were working (just spinning gear that second night).  But we were able to turn it around with some docklight snook and jack.  Here's our best for the evening.. .

     

    zZbEXwa.jpg

     

    This time of year, hot as it is - night trips are a great idea...

     

    "Be a hero... take a kid fishing"

     

    Tight lines,

    Bob LeMay

    (954)435-5666


  8. Jacksonville... if you can believe it... From my experience, the folks that run things here or there - have no problem at all spending other people's money -and this doesn't include the usual kickbacks, bribes and other chicanery that can be found whenever there's public funds changing hands (note - not one reference to the folks running things now.... don't want anyone sending those fine young investigators my way...).  And so it goes


  9. Gee thanks...   Right now I'm still knee deep in re-fitting my skiff... almost done except for the fact that I've managed to screw up my navigation lights (and have a night trip scheduled on Monday...).  It never ends.  I noted a few minor items still to be done - then added them up - only six of them as of now... Just think... if I won the big prize I could have more boats (and a shop or two do all those "little things"...).  The best part, for me at least... would be I wouldn't have to charge the folks that fished with me... since I actually like guiding and wouldn't give it up if I had that "big win"... 


  10. Like most, every now and then I get that daydream of a big win..... but long ago quit buying even an occasional ticket.  With a career in law enforcement behind me and a much too close look at some of the "rich folks" I came into contact with years ago... it's not hard for me to see a "big win" as something of a difficult proposition.  One of the reasons I spend as much time on the water as possible is what I learned the hard way - about people in general... and what will happen to anyone with a lot of wealth - even if all they do is make it their life's work to give it all away... No war stories from this end - but I do have more than a few of how people in general behave when money is involved - particularly big money...  My years on the street were from 1973 to 1995 - back when we really did have folks you  might meet who carried their cash - in shopping bags (and that was just the accounting end of dirty business down here in paradise..). Glad those days seem to be behind us.. 


  11. Knock on wood... so far I haven't needed special glasses or magnifiers for my fly tying (maybe it's just that saltwater bugs are much bigger than freshwater stuff over all..).  But as far as rod wrapping, reel repairs,  wiring or repairing stuff on boats (always upside down and backwards.. "aren't boats fun?")  and other fine work goes - I am wearing a small bright head lamp for careful work.. and I do have a selection of jeweler's loupes for extra fine work...  I can remember my Dad saying over and over again while working on one project or other that you really had to have good lighting to be able to do a proper job.  He did a 28 year career with the Corps of Engineers and could do it all from automotive work to plumbing, to crafting furniture with joinery techniques only... My small skills by comparison are only a weak echo  of his.  Wish he were still around... 


  12. Looked at this older thread and thought I’d mention how I would use a ‘yak - if I had one…

    I’d only use one to get me to bonefish flats Oceanside… then wade, towing the’yak behind me.  Oceanside flats are generally harder than bayside flats (no fun wading soft flats but I did just that years ago… with a 8wt in hand).  You can approach big tailing bonefish on foot much better that way than any other way.  

     

    For me all of that was years ago before hurricane Andrew in 1992.  The average size of bonefish in the early seventies really was 8lbs if you can believe it.   Seems like a dream now - but if we’re careful and work at it, just maybe we can bring that fishery back to what it was…. If I’d had access to a good kayak all those years ago I might never have taken up fooling around with motor boats.


  13. That Black Mamba in a larger size would be a deadly pattern for big tarpon holding in rivers that drain out of the Everglades...  We use something similar -the small one is done up on an Owner Aki 2/0 hook (five to five and a half inches overall) -the big one, six to seven inches long on a 4/0 hook... The gear?  a 10wt for the small size and a 12wt for the large one,  each set up with a full Intermediate fly line... 


  14. A few things I've learned the hard way over the years about serious rod repairs... As Steeldrifter noted - replacing handles, particularly a cork handle is a chore - think long and hard before going down that road... Keep heat of any kind away from rod blanks - they're made with heat (thermoplastic) and heat will cause them to soften and de-laminate - something I had to learn the hard way... The key for me about whether to do a handle replacement (remember I'm only doing fly rods maybe one out of five as opposed to conventional or spinning rods...) is whether the reelseat and the rod blank are in good shape and the reelseat is exactly where you want it... If that's the case my first step on a fly rod is to remove the butt section of the rod and carefully cut away any guides on that section... You won't have to mark them, the residue of finish where they were will show you exactly where to re-do them -after your repair / replace that old cork grip.  Next cover the end of the reelseat next to the cork with tape to protect it - then with a knife (and as already noted,  a good stout filet knife (mine is an Old Hickory stiff boning blade with a very good edge...) and begin cutting away the cork a bit at a time...  This is best done outdoors or with a garbage can under your working area (cork chips everywhere...).  Once you've gotten down to the blank's surface get a bit careful as you remove as much of the cork as possible.... take care not to cut into the blank if at all possible... I use the back side of my blade to scrape away as much of the glue and remaining cork as possible - then holding the blade's edge at a 90 degree angle I lightly scrape and chip away any remaining glue (and for the rods I make - it's always epoxy... I'm working against...). You can thoroughly scrape a rod blank to the point the you remove finish - without damaging the strength of the blank.  Years of hard service after replacing a rod grip (either cork or veltex, or other synthetic grip material to back up my claim..) for this user...  All I'm doing with this operation is removing as much of the remaining material on the blank - so I can slide a pre-shaped cork into place when I'm done - it doesn't have to be perfect-  and if at all possible I avoid sanding the blank - since that weakens it...  

    Before gluing up that new cork handle (or cork stick...) I ream it out until it's a very tight fit (done right I want to be able to dry fit it only a bit short of all the way down the blank.... then start my epoxy at least an inch or two above where the grip will be when it's forced into place as a lubricant and apply it generously down the area where the old grip was... Once it's glued in place i then use a homemade cork clamp that's long enough to reach the end of the reelseat  -two threaded rods (light stuff - about 1/8" rod..) with a 3x4 piece of 1/2 or 3/4 scrap board with a hole in the center of each one and washers with wingnuts at each end of the threaded rods to slowly and very firmly clamp that new grip tightly to the reelseat while the epoxy sets up (I prefer Fasco, two hour cure epoxy...).  The last thing to do before setting the repair up to cure out - is remove the tape on the end of the reelseat, then with lacquer thinner on a rag (not much...) do a quick clean up of any epoxy so that  you don't have to deal with it after it cures out (another of those "ask me how I know" deals... ).  Now for a pic or two...

    DjbwN7b.jpg

    cork clamp - very old school... and of course, homemade...

    MjzxtQB.jpg

    the top end of the clamp - this one was split to be able to attach it (only needed occasionally) on repairs where you can't slide a clamp in place... I have four or five different length clamps I've made over the years as needed.

    1VDiuhL.jpg

    the logo on the rods I build and my hat's off to anyone that can make a living building rods... for me it's just a hobby that got carried away... starting in 1971.  I"m still making every rod that I hand my customers on any charter though - except fly rods since it just takes too long to make a rod when we break one (and we break some fly rods each year..).  For my fly customers we're using TFO rods - no other outfit has the warranty service they provide a working captain or any ordinary angler...


  15. Great report and here's tip from one of Lefty's books... On days with good sun - but your angler's face is in shade... Turn on your flash on that camera - even though it's daylight.  The flash will fill in some light onto your subject's face and add a bit to any photo... When I can remember to do that - I get some great photos that way...


  16. If it was a machinist  -I'm guessing you're missing the part it attaches to.... I'll have to dig out my own Frankenstein vice and take a pic or two to post.... It's made of a small pair of vise grip pliers, welded on an angle to a piece of 3/8" threaded rod... Not exactly what you'd want to tie up freshwater bugs but very do-able tying up the bucktails on "deep jigs" in one to five ounce size range...  Boyd Pfeiffer's old book, Tackle Craft was the inspiration more than forty years ago now...  I have a bobbin made for that matches it in size - the "thread" - re-cycled 10lb monofilament fishing line... Like I said - not exactly something to tie up a trout fly with...


  17. Not a new story unfortunately.  There will always be a few perfectly willing to break rules, regs, laws, etc. - for personal profit.... Hope their vessel is confiscated and whenever our state (or your state) is considering funding issues for conservation efforts on land, water, or sea... step up and join the folks who know that properly funding the folks who protect our natural resources is something worth doing... 


  18. One thing is certain - during summer - when the fish are eating everything in sight... My phone doesn't ring much for day trips.  Night trips are great, but few and far between as well.  Our big season is December through the end of April when all the visitors are here...


  19. Glad to hear y'all are fishing... Me?  I'm still knee deep in re-fitting my old skiff.   It now has a new motor (with all new gauges, shift/throttle, etc - had to switch brands to Yamaha after Evinrude quit making new motors...).  As part of the process had to have my center console re-surfaced to cover all the old instrument holes (black acrylic) and am in the process of rigging out and setting up my first chartplotter... great fun - the first thing I did yesterday when I powered it up was to somehow establish Finnish as the language for the thousand dollar machine - hope to fix that this morning with a soft re-set... Lucky me... Should be back up and running shortly though.  Wonder if the mosquitoes have missed me?


  20. As part of the navigation gear on my skiff… I’ve long used a GPS… I was interested to learn that the time function in any GPS comes from satellites that are using atomic clocks so they’re nearly the most accurate around… Of course I still manage to come home later than predicted…

    . In a day or two we’ll be adding my first chart plotter ( a big upgrade from the inexpensive handheld GPS units I’m used to) …as part of re-powering and re-fitting on my skiff.  I’m pretty sure the new gear will be much more capable than this operator.


  21. In all or most of the tying videos I've watched... I see tyers adding materials - then trimming the parts not needed for the pattern away from the hook afterwards... Tying production style the way I was taught you always trim the material precisely - before tying it in place, and rarely ever use your scissors to trim away anything during the tying sequence - saving time and motion while also generating a very precisely tied fly - time after time.  Add a "master pattern" on the bench with you while tying greatly speeds tying - and also allows you to generate that same pattern over and over again - with the same proportions, colors, etc.

    This was something I learned to do on my own years ago.  Every time I filled an order I'd tie one or two extras - then line up all of the run and be as picky as possible about the best of the bunch in every respect, colors, proportions, density, etc.  That saved fly would become a "master", set aside, sleeved, and always available for the next time I received an order for that specific pattern... Any additional over the order went in my box to be fished.   Over time some patterns evolved into a bit different fly than the original.  When that occurred it would be time for another master to replace the one in hand.  To this day I still have master patterns I set aside more than 35 years ago... In many case the customer or shop that placed the order isn't even around still - but those masters make a great starting point for developing something new as well as being able to re-generate a specific order... 

     

    I always got a great response from any guide or shop when, even years later, I could still produce that same exact pattern to fill their order... 


  22. Years ago I wore a watch and occasionally a bit of jewelry… Over time I learned not to wear any watch, ring, or anything that could get snagged by a leader, line, or rope…. In my situation, occasionally handling fish a good bit larger than me at point blank range -it’s just not safe.

    the biggest fish to date?  A roughly fourteen foot long sawfish, carefully released without removing it from the water.  No we weren’t flyfishing, and my skiff is only 17’ long…
     

    The electronics on board my skiff provide very accurate time with just a glance.  Many years ago (early seventies) I got my first jobs working as a mate on charterboats and learned, at times the hard way, about handling big fish at the boat, with little instruction at all.  When I think about the risks I took back then my only excuse is that I was learning, and not so smart…. These days I’m a lot more careful.

×
×
  • Create New...