Search the Community
Showing results for tags 'bucktail'.
Found 7 results
________________________________________________________________________________________ A video of hair stacking using this technique is posted on YouTube at https://youtu.be/9gv1tyfNylw ________________________________________________________________________________________ ____________________________________________________________________________________________________________________________________________________________________ Making a Homemade Aluminum Stack Tube for a Large-size Zippy Stacker Aluminum tube used in the video: 5.5-inch, 140mm long; Outside Diameter: 0.75-inch, 19mm. The wall thickness is 0.04-inch, 1mm, leading to an inside diameter of 0.67-inch, 17mm. The outside diameter (OD) of the tube needs to be close to 0.75 inch, 19mm, so the stack tube is loosely held when inserted in a large-size Loon hair-stacker with an internal diameter of 13/16-inch, 21mm and an internal height of 2-inches, 50mm. Keeping the tube loose in the 2-inch high stacker allows it to jiggle, wiggle and roll during the stacking process which promotes getting the hairs detached from each other and settled to the bottom. Note that other than the using a tube with an OD that allows wiggling, within reason, wall thickness and length of the tube can vary to suit the tube you have in house or the hair you intend to stack. The stack tube is easy to make at home with just a ruler, a hacksaw, fine sandpaper, and steel wool. Measure out a 5.5-inch (140mm) length of tube-- a length will handle almost all bucktail hair lengths. Scribe an approximately 20-degree angle at the 5.5-inch mark. This angle cut opens up a port in the tube so that the hairs can be seen in the 1/4-inch (6.3mm) tall observation window of the Zippy stacker. Cut the tube to length while tilting the saw at an approximately 20-degree angle to follow the scribed line. Deburr and polish both ends of the tube using fine sandpaper and then the steel wool...and its ready to use. Optimal Bucktail Specs: The straightest, smoothest hairs that have little or no crinkle in them will give the best result in the stacking process. Stack Tube: Pros 1. The tube is Inexpensive and simple to make. A large Loon Zippy hair stacker is US$27 in 2023. 2. Uses a static-resistant aluminum tube. The possibility of static cling is why an aluminum tube is preferable to a plastic tube. If needed in a pinch, a plastic tube does OK in the dry climate I live in. Results may be worse in a humid climate. 3. Bundles of bucktail hair can be introduced into either end of the stack tube. 4. Theoretically, no limit on length of hair that can be stacked-- you just need to cut longer tube. The open-end design means that theoretically can stack with hair sticking out the top. However, as shown in the video and discussed below, hair can be lost out of the open tube. 5. Large internal diameter of stack tube, at about 0.675 inch (17mm OD), is an advantage in getting the individual bucktail hairs to separate during the stacking process. 6. That the stack tube is loose in the Zippy hair-stacker also promotes settling of the bucktail hairs when the hair stacker/tube assembly is held just off of vertical and jiggled, bounced and rolled along with a dead-blow style of tamping action. 7. Observation window built into the Zippy stacker can be aligned with the angled end of the stack tube so that the progress of stacking can be observed...and the process continued if the result is inadequate. The degree of stacking success-- defined as the proportion of hairs aligned at the bottom of the stack tube can assessed by first making an estimate of the number of hairs put in the tube, say 50 hairs. Then, after completing the dead-blow, jiggling and rolling cycle, look into the observation port and judge the number of hairs number of hairs aligned at the bottom of the stack tube, as you know, as this value approaches 50, the stacking success approaches 100%. Cons: 1. The stack tube is open ended – so it is possible to slide or throw the hair out of the open top. this issue is fixed by using dead blows rather than a swinging motion to settle the hair. 2. The hinged base of Zippy stacker is held closed by magnets and that base can open while tapping or jiggling the assembled tube and Zippy base. This issue is solved by holding assembled stacker base and tube together during use. Notes: a. A successful stack is something like 95%+ of the bucktail aligned on the bottom of the stacker. This level of stacking can be achieved when using optimal bucktail hair, a stack tube and an appropriate dead-blow and jiggling action. b. If a tapered tail is desired on a fly, it's better not to use a tube stacker as having hair end at different points as the end of the bucktail bundle is approached lengths leads to a gradually thinning hair bundle that gradually thins out to a point. _______________ I suggest reading the following article to understand the hair stacking process and strategies to improve your hair stacking results. https://globalflyfisher.com/tie-better-tying-tools/stacking-material
Fun with fur in February--In the mail.
DarrellP posted a topic in Fly Swaps & ContestsSome of us don't have much hair,, so you might like to work with some! Tie a dozen flies with bucktail, fur or hair wing or tail. Size 6 or smaller. Due Feb 15th. Send SASE and whatever container you wish. Polybags for flies are ok if you wish to use them. Send to: Dr. Darrell Phillips 7890 NW Westside Rd Carlton, OR 97111 1. WWKimba. RECEIVED 2. Fishing Bob Nelson. Trude. RECEIVED 3. Woodenlegs RECEIVED 4. Flytire RECEIVED 5. Vicrider. RECEIVED 6. Johnw1986. RECEIVED 7. Steve-Stabgnid. RECEIVED 8. Dogfacedoc. Deer hair Caddis. RECEIVED 9. jvmills. Stimulator. 10. Chugbug27. Haiwing streamer 11. Jlearsi67. RECEIVED 12. Trouttramp. RECEIVED
smbeck posted a topic in The Fly Tying BenchI'm reading through "Fleye Designs" and Bob mentions wetting flies a lot. The end result is a nice looking tapered fly. I am wetting my flies with warm water and hang drying them, but the fibers don't lay back nicely like Bob's. Is there something I'm missing? Should I be soaking the flies? I just run them under hot water for a few seconds.
Working with Deer Hair
texag17 posted a topic in The Fly Tying BenchI am fairly new to tying flies and I have been tying lots of Clouser minnows to prep for the white bass run. I ventured off from tying a sparse pattern and tried to do a thick, perch clouser pattern. I did a base with bead chain eyes, a small clump of florescent orange, then a bit of olive green on top of that before flipping it over and tying in flash and another set of olive green. Towards the end of putting it all together with the last set of hair, the thread started to slip and rip from other parts that had been finished. Is there a way to prevent this? I had to untie a bunch of it and tie the last clump of hair further back to get it to all tie in together and I used a lot of head cement because I was unsure of how it will hold up in the water. I have attached a pic for reference of the end fly.
Real vs Faux Bucktail Comparison
McFlyLures posted a topic in The Fly Tying BenchThis video is a bit different, its more of a comparison between two materials. The synthetic bucktail, and real bucktail. From my opinion, I think they both have unique properties and differences, so much so that I really think the should be different named materials all together. Faux bucktail is somewhat misleading as its not exactly the same as the real stuff. In some ways its better, and in some ways its worse. For certain applications it could be better, and for certain applications it could be worse. So thats my conclusion. Hook: Gamakatsu SS15 in size 2 Eyes: Lead Painted Dumbell Eyes in large and red Thread: Danville 210 Flat Waxed in White Material: Real and Faux Bucktail in white/olive Head Cement: Solarez "Bone Dry"
Properly prepare buck tail.
McFlyLures posted a topic in The Fly Tying BenchEveryone that ties regularly knows how to use buck tail , and prepare it properly. However those that are new into fly tying might not know the simple but crucial steps in preparing buck tail before tying it in. I make these tips and tricks type of video's for beginners, so keep that in mind when watching it. The video is under a minute long, so it won't take too much out of your day. haha https://youtu.be/glU67iVvkc0
dark green bucktail - looking for a source
JimCoraci posted a topic in The Fly Tying Benchany leads? thanks jim