SpokaneDude 0 Report post Posted October 21, 2017 I have YLI silk thread that I am trying to use to create soft-hackle flies, but when wrapping the silk thread down to the bend and back, it breaks several times. I thought silk thread was supposed to be strong, but this thread does not appear to be strong. I am not applying any pressure (more than normal) on the thread while wrapping, but can't seem to prevent it from breaking! Any ideas of what I'm doing wrong or how to keep this thread from breaking? Quote Share this post Link to post Share on other sites
mikechell 0 Report post Posted October 21, 2017 Three reasons why My thread breaks. 1) Too much pressure. Easy to do when you go to smaller threads. 2) Nicks in the bobbin holder. Either end of the tube could have a nick or groove that's cutting the thread. Watch for "frays" before the thread actually breaks. If you see some, then nick in the tube might be the issue. 3) Thread contacts the hook point. This is my most common reason for breaking thread. Of course, you could just have a bad spool of thread. Quote Share this post Link to post Share on other sites
SpokaneDude 0 Report post Posted October 21, 2017 Thanks for the response; I'm now wondering if it's worth it to tie with silk; it's a real pain in the ass to work with, and I don't see any visible benefit. Any idea of the quality of YLI vs the more common silk threads? Quote Share this post Link to post Share on other sites
mikechell 0 Report post Posted October 21, 2017 No ... I break regular threads. Never worked with silk, that I know of. Quote Share this post Link to post Share on other sites
rockworm 0 Report post Posted October 21, 2017 I use Pearsall's Gossamer for most of my soft-hackle flies. Although it is a pleasure to tye with, it is not as strong as 8/0 Uni and will break if placed under too much tension. You should also be aware that silk weakens with age, especially if exposure to sunlight. Quote Share this post Link to post Share on other sites
SpokaneDude 0 Report post Posted October 21, 2017 Rockworm... didn't know about silk thread weakening with age... I assumed that I was buying NEW thread, but not sure... can you tell me why "it's a pleasure to tye [sic] with"? Does it really make a difference to the fish? Quote Share this post Link to post Share on other sites
mvendon 0 Report post Posted October 21, 2017 I have several spools of YLI 100 silk thread. After I read your post, I spun and packed 4 clumps of deer hair with it. It broke one time between packing and starting to spin the next clump, probably because the thread got partially cut from my packing tool. Other than that, it worked just fine. Try removing several feet from your spool and testing it again. You don't need to have it in a bobbin holder either. You should know right away if it's really weak that it's the thread, and not your bobbin holder or hook point etc. Silk thread should last a lifetime if stored properly. I have some older spools of Pearsall's gossamer that are 50 plus years old and they still work just fine. The thing with silk besides tradition is that it changes color when it gets wet and some color shades become translucent. Most synthetic threads just stay the same after they get wet. YLI 100 is a little more thick in diameter than Pearsall's gossamer and only has two ply's, where Pearsall's has three. It's not going to matter much longer anyway since Pearsall's is going the way of the passenger pigeon. You don't need silk for any soft hackle, flymph, or north country spider patterns. Just use thread if you find that it's easier for you. For fishing, it's just not going to make a world of difference what you use. Regards, Mark Quote Share this post Link to post Share on other sites
SpokaneDude 0 Report post Posted October 21, 2017 mvedon: thanks... Quote Share this post Link to post Share on other sites
flytire 0 Report post Posted October 21, 2017 i guess if youre tying museum flies then traditional silk threads would be preferred i tie soft hackle bodies using thread an uni stretch the fish i hook cant tell the difference Quote Share this post Link to post Share on other sites
rockworm 0 Report post Posted October 22, 2017 Most of my Gossamer is over 30 years old and as strong as the day I bought it. I suspect the real culprits in silk degradation are sunlight (UV) and moisture- not simply age. I doubt the fish care what your fly is tyed with- just so long as it looks edible. But I do like the look and feel of a quality silk thread or floss. Pearsall's Gossamer also has a diameter a bit larger than 6/0 Uni which can result in a pleasing "segmented" abdomen. Quote Share this post Link to post Share on other sites
redietz 0 Report post Posted October 22, 2017 At least half the flies I tie are tied with Pearsall's silk, and have never had problems with it breaking. I've never tried YLI, but until this thread I've never heard any complaints it being weak, either. You're not by any chance using black silk, are you? It has a reputation of not being very strong. (It often started out as some other color; there was a problem with the dying process, and was re-dyed black to cover it up.) Quote Share this post Link to post Share on other sites
SpokaneDude 0 Report post Posted October 22, 2017 No, not using black silk... using yellow for "partridge and yellow" soft-hackle fly... not turning out the way I expected, but then again, practice makes perfect! (thanks for the response) Quote Share this post Link to post Share on other sites
phg 0 Report post Posted October 22, 2017 Post a picture so me can criticize, ... um... critique your efforts. I have used YLI 100 in rod building, and have never had any problems with the strength or consistency of the thread. I use gossamer for my partridge and orange/yellow. Never had a problem. I suspect a burr in your bobbin barrel, or, that you are using a steel barreled bobbin, and aren't advancing the thread as you wind. Quote Share this post Link to post Share on other sites
rockworm 0 Report post Posted October 22, 2017 Many years ago I scored a real bargain on eBay- a dozen or more spools of silk thread and floss. The spools were made of wood and clearly fairly old. As it turned out, the thread was pretty much useless. It practically disintegrated in my hands. Quote Share this post Link to post Share on other sites