Jump to content
Fly Tying

Alex_F

core_group_3
  • Content Count

    175
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Alex_F

  • Rank
    Advanced Member
  • Birthday 10/19/1967

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    UK- midlands resevoirs, Scots/Irish Lochs
  1. Cheers NJF. The thing I was after was a nymph that only reflected on the back and belly. If you look at a real midge pupae you'll see that there's no gas bubbles along the centre line, only in the upper and lower segments. I achieved what I set out to and it certainly hammers fish but it only comes into its own on days when they're being reeeaaally picky. Usually a standard, simple buzzer imitation will do perfectly well. ATB Alex
  2. Hi Travis, here's a basic dyeing step by step that I did a while ago, you might find it useful. For a medium olive I use a mix Veniard's brown olive and dark olive. For golden olive I use Jacquard sun yellow over dyed with Veniard grey. In the SBS I was using Veniard's dyes but it works equally well with Jacquard. The only real difference with the SBS and now is that I got some glacial acetic acid and diluted it to a 15% solution which is a bit stronger than your average vinegar. Other than that I use pretty much the same procedure. I mention the importance of keeping a note of time and quantities, this only holds true if you want consistency of results over a number of capes dyed the same colour. If it's just a one off then there's no need. I can't comment on RIT as I've not used it myself. Even so, AK Best's book is a good read with lots of handy hints. Hope this helps. ATB Alex
  3. If you're interested, you'll find a full SBS for the above pattern here. Have fun.
  4. A new addition to the fly pattern database has been submitted by Alex_F: Electro-static Buzzer
  5. Do these look anything like them Arkle? An old friend of mine went to some extraordinary lengths years ago to dye his Seals fur and other bits and pieces using natural dyes and mordants. He even used Horses (not Ass) urine to get Rogan's famous fiery brown. Now me, I'm a considerably less obsessive but I tried to emulate the shades he attained by using normal acid dyes. The yellow is pretty straight forward, bright yellow with an over dye of very weak insect green. The fiery brown is a blend of shades but gives the warm golden brown glow of the original when seen by transmitted light whilst looking bracken orange/brown by reflected light. That took some experimentation. I ask as he may have been copying Rogan's colours as he was certainly tying in the 70's. The picture makes them look a bit drab but it's the best I could get without setting up a decent light source.
  6. Not a bad attempt TS. The use of "Straddlebug" dressings as they are known is pretty much isolated to the big loughs of Ireland and to some extent Scotland so it's unlikely you'll get much of a response to your dressing on a board that's heavily US based. It's not a reflection of your tying, it's just that most folks won't know what it is. If I might give you a little constructive criticism. Try using a different coloured thread, say olive or yellow. The thread colour makes all the difference to the shade of a dubbed body. Try getting hold of some real Seals fur, it's miles better than Antron IMO. The ribbing really wants to be a bit thinner with slightly closer turns and the head's a bit big. Having said all that your fly will still catch fish. As Jon says, it's a fly for a brighter day. I occasionally use a different version of the Gosling that has a golden olive/ golden brown Seal body and the hackles are Golden Pheasant red body feather and palest bronze mallard (see attachment). My favourite Straddlebug dressing has to be one of the many French Partridge variations. A large Golden Olive Dabbler is something I often use these days. Keep up the good work. Best wishes. Alex
  7. Edit: Double post. Sorry
  8. Or Formaldehyde. If this pelt in question is the Golden Pheasant skin you've recently bought then I'd leave it alone and pluck individual feathers and wash them. The reason is that a dry GP skin can be very thin and is liable to turn to mush in water. If the skin in question is robust enough then by all means wash it. For drying skins and capes place a few layers of newspaper topped by a few layers of kitchen towel on a flat surface. Place your skin on top then repeat with layers of kitchen towel and news paper to form a sandwich then place some heavy books on top to create a press. This will help flatten the skin and soak up excess water. After a day remove the skin and allow to air dry or blow dry at a low heat setting.
  9. Alex_F

    Seal Fur

    I get mine from Canada in bulk and dye my own but if you want to try ordering from the UK the best place would be from Steve at Cookshill who has a range of 22 shades. Seals fur, accept no imitations. :headbang:
  10. All four of your recent flies are just spot on. I can tell you're tying up for the Duck Fly. With any luck I'll be over on Corrib / Mask in the middle of April for a bit of Duck Fly and Olive shenanigans.
  11. Arkle is correct, the closest pic was in Twofingerz' post http://www.fliesonline.co.uk/erol.html#1558x2330. The dressing I use these days is: Hook: 8 - 12 L/S. Silk: Red. Tag: Globrite floss shade 4. (fluoro red). Body: as tag. Rib: Flat gold tinsel. Hackle: Three turns of long hot orange hen. Wing: Hot orange Calf tail, Arctic Fox or Marabou. It's a very effective lure from August to October when the fish are seriously on daphnia.
  12. I use a very similar process to this with the exception of using 40% volume peroxide and Wella products as opposed to Clairol simply because Wella is the easiest to obtain where I am. Depending on what feathers you wish to bleach you may have to be very careful as the bleaching solution may cause some damage to the barbules and hooks used to marry the barbs together. If it's capes then you should be fine. Also, make sure you wash them thoroughly before and after bleaching. Normal dish washing detergent is ok but I prefer Venpol or Synthrapol as they're considerably less "sudsy". :dunno: As far as dyes go I mainly use Veniard dyes but have started to use Jacquard acid dyes too and had very good results with them. There is a product in the US called Fly Dye but I'm afraid I've no experience with it.
  13. That sounds very familiar! But in Ayrshire we used to fish the upstream worm as well, perfectly legally. It's a great primer for fishing upstream wets later.
  14. The above method is by far the best but as Ashley says get white belly hair, it pretty much pure white to start with and is the #1 stuff for dying bright primary or secondary colours.
  15. Alex_F

    Hook poll

    Partridge because of their quality and the fact that they're the only ones who make anything like the YMM2A which is the closest you'll get to the discontinued CS7, the perfect hook profile for wets IMO.
×
×
  • Create New...