Fly Pattern Database / Browse by Topics / Browse by Material
GreenCaddis Fly Tying Hooks
Premium fly tying hooks as low as $2.22 per pack plus free shipping!
We are excited to introduce the GreenCaddis brand fly tying hook to complement our line of fly boxes and scissors. GreenCaddis hooks are made from premium hi-carbon steel and go through a chemical sharpening and polishing process that make the points razor sharp. Our hooks also undergo a unique tempering process to add strength and to ensure the hooks remain sharp even after heavy use. To encourage our customers to try out the GreenCaddis hooks we have all hooks listed at 25% off the retail price and free shipping is also applied to ever hook order. Plus, you can save an additional 25% when you purchase five or more packs of hooks. Click Here for More Info
View Original Forum Topic


Current Tags for This Pattern
/ baitfish / Black / bluegill / olive / puglisi / Red / SLF / Yellow /

E.P. Fiber Bluegill Baitfish

 
tied by flytiehunt
Fly Type: Streamers,
Target Species: Freshwater Bass,
Recommended Region: Central US,
Imitation: General Baitfish,
Material List:
Peanut Butter Fly (Bluegill)

Recipe:
Hook: Saltwater hook 3/0
Thread: .006 Monofilament
Wing; E-P Fiber (olive color for the body and yellow and orange for the belly)
Gill: SLF Hank ( crimson red )
Eyes: Black plastic eyes (flat stick ons)

Tying Instructions: TYING INSTRUCTIONS:

Step 1.

Mono is a little harder to get secure around the hook shank. It tends to slip a lot easier. So when you tie it in make sure you hold the tag end at an angle until you wrap enough turns to secure it. Then cut the tag and make a few more turns to make sure its not going to slip.


Step 2.

Cut a piece of SLF. You donít need much. You can either fold it around the thread and tie it in. Or tie it in the middle of the clump. Make a few turns tying it down. Then fold the other piece over and tie it all down. I do about ten turns or so. Make a even cut in the back. I like to use a straight pair and I make one cut with the back of the scissors.

Note: It makes it look a lot cleaner of a cut when you only make one cut.


Step 3.

I donít show this step in a picture, but itís a step you need to do before tying this E.P fiber in. When you get a clump out of the bag you want to pick enough to split it in the middle. Once itís separated evenly you're going to add flash all the way down it. Then sandwich the two back together (with the flash in the middle) and you're ready to tie it in. You shouldnít use the whole clump. This should be enough to do two whole steps like the first one.


Note: The type of flash you can substitute that is real easy to find is wing-n-flash. They make all types of colors and you can add the colors to the color of fiber your tying in.


Step 4.


As you can see I already tied my first clump in. When measuring (proportion) this fly to shape. You have to remember your building it (the clumps) to taper smaller as you go up the fly. So the first clump is going to be almost the first clump. You should have enough to do the top one more time. Now the bottom is a little different because the first clump is going to be the same in length as the first one, but the rest will be small because it only needs to measure the gap of the hook the rest of the way up.


Step 5.

When tying this down you can measure the back to either be shorter like a peanut butter fly in the Enrico Plaglisi line or it can be the longer ones that you can paint to look like various baitfish patterns like his mackerel.


I tied top side first to get my measurement and then rotate and do the same to the other side. When tying this down one thing to remember is you donít want the clump to be tied right on top of the hook shank. Make a few turns to secure it and then try to spread it around to hide the sides of the hook. It needs to blend so you canít see the metal showing. This step is called a herringbone technique. What you want to do when tying these two clumps in (in the two colors you picked to use) is tie the first clump down then rotate the hook to the other side and tie the other clump in on the underside. Once youíve tied them both in you will want to rotate the vise back to the topside and fold the material over towards the back tying right in front of it with the mono. Donít tie it down, which is tying on top of the material you folded over, but right in front of it forcing it just to stay back out of the way. It will look smashed down instead of flared out.


Do the bottom the same way as the top.


Step 6.

They should both look the same when you get done with the first set of clumps. When you pull the material back to get ready for the next set. You will notice the material will mesh together (and thatís good). That way it will stay out of the way until the fly is completed. Move the thread up about a ľ inch up the shank and do the same step again. You will do this a few more times as you tie up to the eye. Look at the pictures below to get the right measurements on where to tie the next clumps in.


Step 7.

Continue the same step with the second clumps in olive. This should be your second set of clumps.


Step 8.

This is where you will still tie the olive on top, but the bottom will change twice with two different colors. The first one will be the yellow. Make sure you add flash in the two different colors also.


Step 9.

Tie in your yellow. Remember this only needs to be twice the gap in length.


Step 10.

After you tie in the last set of clumps. This step will be a little different then the rest. This time your going to tie on top of the clumps. You donít want to go too far back (notice in the picture) just enough to tie down the material forcing it to lay back. Whip finish the fly and you're ready to start cutting it to shape. If you tied it right with keeping the material shorter as you went up the fly then this is how it will look. It will already have a shape of a baitfish. This will help you get the desired shape when cutting it.


The next thing you want to do is take the fly out of the vise and lay it on your leg. With some kind of soft brush you will start at the front of the fly and brush down blending all of it together. Keep the strokes straight and smooth. This will also force some of the hairs to the side hiding the hook shank.


After combing the hair to blend together. Use the taperize scissors and make two cuts up at the head to get some of the excess hair out. Now cut the fly to shape.


Step 11.

You can either glue the eyes on now or wait until your done shaping the fly. I like to use marine goop the best. Make sure when you apply it that the goop isn't dried out. This can easily happen if you have an old tube laying around. The glue should be like a liquid form not like paste. If it doesn't it wonít dry and the eyes will come off the first time fishing the fly.



I also put small dots on each side with a prismacolor marker.



Additional Photos



42 FTF Members Bookmarked This Pattern
Dave
drpigglett
Kraut
chaza402
TerryLee
-jwang
gpnfish
Idahomike
downing0421
Bass Bug
Waterboy
Diaz
Futzer
gahools
chrismartin
plisko30
crowbuster
C Teeter
Kenneth
mkoloch
supertubefly
Stendalen
outdoorsaddy
Orvallo
smaraghy
grits
msujmccorm
Hova
frenryfly
bear3579
Margaretann
DNR
southernRoller7
rural
shakes
Browntroutally1214
jamesbrock3
Scientist_Andy
ArtV
jkdurden
csansou3
GEMicher
Featured Products

The Source: Tasmania

Flies That Catch Fish Volume Two - Nymphs & Wet Flies

Bugwater

4.5Ē Hair Scissors - Straight Blade

Twenty Salmon Flies: Tying Techniques for Mastering the Classic Patterns from the Simplest to the Most Complex
Page Load Time: 0.3366 seconds.