-
Content Count
36 -
Joined
-
Last visited
Posts posted by teamtrout
-
-
We all know the two problems with clamp on the edge of a table style vices are trimming debris falling on your legs and floor along with the need to reach over under or around the vice to get tools and materials.
My patent pending table extension solves both these problems. It not only catches the debris but also creates a space to rest tools and materials, eliminating the need to reach for them.
Installation: Place the extension on the edge of the table then place the table clamp of the vice over it and tighten as normally done.
Advantages over trim bags: 1) No need to take vice apart to install. 2) Does not encroach upon legroom. 3) Creates convenient tool and material rest. 4) Easily wipe debris into trash rather than shaking out a bag.
The final product is clear so even small amounts of any color materials are easily distinguishable.
So please let me know what you think, including how much you would expect to pay for this product which is ready for sale. Thank you.
Okay, so I looked closely at the pictures, and I think I could really use this! Those "waste catchers" an I have never gotten along, with them always falling off and such. I really could, and will use this. I would make my own (it seems like I could make one without too much work), but if you do make them, I'll buy one. I would pay in the $8-12 range, but if the price is too high, I'd feel better off making my own.
A question for you - What do you think you'll try to sell them for?
And as troutguy said, I'd try to cut them more smoothly. And don't bother trying to patent a piece of plastic. You're better off giving it a name and trying to get a few of your local fly shops to carry them.
-
http://www.orvis.com/p/hy-flote-shake-n-flote-renew/9x6x04
Heres the "real" stuff. But Doing what either of the previous two posts suggest work well and is basically free.
-
When submitting a fly, did you only submit to Rainy's? I'm just wondering if you could submit to Umpqua, Orvis, Rainy's, and whatever other ones are out there, to maximize your chances and ultimately, the number that sells.
-
I'll be at the fly fishing show... in Marlborough MA
-
Basically what is happening is I have a friend who's producing a show for wfn who is willing to promote my products if I can come up with something for him to use.
Any "sneak peaks" on the show? I have WFN, I'll check it out when it comes out.
-
I have been on other sites and that is not the case?
Maybe at some point in time warning points were required .
I believe it is because of the "forum template". Like when these forums are created, they are a blank slate that can be customized, but they have some basic defaults. I know that the Carp Anglers Group is made from the exact same template - they have the warning points and same basic setup.
-
Maybe we should use them. No not as some kind of disciplinary thing, but as a fun thing. (I think people are very well behaved here, no need for that). What we could do is have some fun forfeits, like you must tie and post a joke fly if you get 4 points. Well it is the silly season.
Cheers,
C.
Lol, I like this idea!
-
Yes, 0 is what you want. You get warning points by breaking forum rules. Only you see how many warning points you have, so you can see yours, but nobody else can.
-
Thanks C,
I doubted it would make much of a difference at all, but always fun to match the fly as closely as possible. I will stick with peacock.
Thanks,
~Troy
-
So I was tying up a few beetles for next year, when I started wondering about something. The beetles I tie are fairly are fairly realistic, and this is the closest thing I could find to them (I don't have any pictures of mine).
So I always wrap something around the hook before I fold the foam over and tie it down, but I was wondering what you guys think is best. Peacock herl, black dubbing, etc? Just to be clear, I am talking about a material to wrap the hook in first, so the trout doesn't see the shank of the hook. I have never seen the underside of a beetle (or paid attention to it), so I don't know. I have always used black dubbing, but I wonder if something like peacock herl would be more realistic (not that it would make a huge difference).
Thanks in advance,
~Troy
-
I was going to recommend this one as well. It has pretty clear pictures, is not too complicated, and looks good. It is my go to heptagenia nymph.
-
Lots of good advice on here... I'll try to add a little.
If you look around, you will see some with rubber legs, some without. It doesn't really matter, but I like them, especially on bluegill poppers. 'Gills are suckers for rubber legs.
And for bodies, as mikechell said, flip flops are great. Get a pair from the dollar store, and you can make dozens of poppers. Just make sure they're thick enough.
Also, look around for bulk packs of corks. I got 2000 on eBay for $10. They are made for some sort of mini wine bottle, but they are perfect size for bass and bluegill, and are tapered. I don't know about you, but buying those pre-made foam bodies can get expensive, or at least compared to the corks.
Post some pictures if you tie some!!
-
I found the name of that yarn that I used in my crawdad, it's Bernat's Pipsqueak. A lifetime supply for 20 people can be had for $4 at JoAnn Fabrics. For about the same price a very small package can be had through Hareline. They call it Wide Pseudo Herl 1/2".
Thanks heavynets! I made a trip yesterday, but couldn't find it. Now I'll have to order more!
And it's only $3.19 right now with a select yarn sale . Order now to save 81 cents!
-
Thanks for all the steps. I'll definitely tie some up!
And sorry, the yarn I have was just a little ball I found in my wife's supply. I need more though, so I'll make another trip to JoAnns. If I can find it, I'll let you know.
Bugging out some brown yarn with a dubbing pick or piece of Velcro may give a similar result. Probably not as good as the original yarn though.
-
Here is another one. The body and claws are made from some type of fuzzy yarn I got at JoAnn's fabrics. The claws were flattened with E-6000 glue and then covered with Sally Hansen. The tail is a flattened x-small dumbbell eye. The back was trimmed and covered with UV epoxy and then with Sally Hansen nail polish. The claws arms are very flexable. The hook is a #4 aberdeen that sells for about $1 for 20 at Walmart.
This crayfish is really good!! One of (if not) the best I've ever seen! I am definitely gonna tie a bunch up. How do you make the arms? I have the fuzzy stuff already, but do you just tie in a strand on each side and cover it with glue, or do you twist it so it doubles over or something?
-
As others have said, it will fish. Most fish aren't very picky, and flies like that work well.
I do like vicrider's suggestion of using marabou: that would give it a whole new level of action in the water.
-
I fish conventional gear a lot too, and have had TONS of success on it. Maybe too much success. It almost isn't fair to the fish. But I do think its an interesting idea - a fly alabama rig. I like the texas rigging hook double fly a lot, and will definitely be tying some up soon. But I may give it a shot at making some sort of way to have them fish side by side. I think it would be sort of neat for bass fishing, even if it is cheating a bit.
-
I actually had this same idea last time I was at IKEA. I was under the impression it was synthetic...
It still looks good. I'll get one next time I find myself at IKEA. It probably would be a good material for you if you tie a lot of streamers. Easy to dye too.
-
take a craft pom pom
and stab it on a scud hook
secure it with your favorite super glue
no tying required and the fish love them
I saw these on your website (I think it was your website anyway) and made some. But for me they floated- I guess in tandem with another heavier nymph mght work well.
-
I know I can probably get a squirrel, and I have watched a few videos on how to skin them and cure the hide, but what I am wondering is what you guys do with it? Shave off the fur and make dubbing? Cut zonkers? Or just keep the hide in one piece and clip off fur as needed for tails or dubbing? I'm interested to hear what you guys do with the hides.
-
This was on http://www.azbythefly.com/. I saw this idea and loved it, especially because they sell those circular containers at any craft store for $1. Screw a dowel rod into some sort of base (I just use a square piece of wood), and pile the containers are. A lot cheaper than buying a pre-made one, and works just as well too.
-
Just wondering, are there any advantages of whip finishing by hand? To me, it has always appeared slightly slower and harder, so I have always wondered why not just but a $3 whip finish tool?
-
I know this was posted a while ago, but wanted to say that these are great videos! I was thinking about getting into tube fly tying, and this video convinced me! I currently am awaiting a kit, and can't wait to get into it!
Just wondering, do you think you'll ever get a tube vise or just stay with the attaachment?
Troy
-
These flies are the real deal! I use them all the time, and they catch plenty of fish. So easy to tie too.
Float or sink?
in The Fly Tying Bench
Posted · Report reply
Has anybody used one of these for carp? I was thinking about tying some, but they appeared to me that they would float. I mean, I can't see any bulk on the shank that wrapping lead would have caused. From my experience... corn sinks, so I'm trying to see how this would work. I guess carp would probably hit it regardless...