sneektip 0 Report post Posted August 19, 2011 With lots of frogs and fishing pressure on my home bass waters, I wanted a realistic immitation that I could present as quietly as the naturals. This fly will fish on the surface with short little pops, or dive under with long line strips. Recipe Hook: Gamakatsu B10S sz. 1/0 Thread: Danville Flymaster plus Weedguard: 30lb flourocarbon Legs: 2 rabbit zonkers Leg possitioner: 2-part, 5-minute epoxy Under collar: rabbit zonker Over collar: deer hair Head: Rainy's Foam Diver First things first... Attach legs at a downward angle. Hides in, toward each other. Tie in a crosscut zonker and wrap forward. Add deer hair and spin tight. Trim the hair fairly close, and flat on the bottom, just to add bulk to the body, but leave some longer tips on top of the fly. Bring the weedguard forward and push it through the hook eye, then tie it off and clip excess. Orient the fly upside-down, and spread eagle. Mix up a bit of 2-part epoxy and fill the space where the legs, hook, and weedguard meet. Let cure with the legs at a 90 degree angle from each other, 45 degrees off hook center. Fin! Quote Share this post Link to post Share on other sites
nyFLYguy05 0 Report post Posted December 29, 2011 Very nice pattern and fly, thanks! love catching and watching largies behind a surface fly! Quote Share this post Link to post Share on other sites