Jump to content
Fly Tying

Crackaig

core_group_3
  • Content Count

    2,245
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Crackaig

  • Rank
    Advanced Member
  • Birthday 07/11/1963

Previous Fields

  • Favorite Species
    Brown Trout
  • Security
    22

Contact Methods

Profile Information

  • Location
    Highlands of Scotland
  1. Some years ago I got hold of some gold plated 1mm 1/25th inch bead chain. Though that is far from the smallest. If you want dumbell eyes down to #24 then use the connector between the beads in bead chain. Cheers, C.
  2. I've played around with a couple of the Ekich bobbin. Note, it is not a suitable replacement for the Nor bobbin on the Nor Vise. The travel is not great enough for it to work as the Nor Bobbin does. As a piece of engineering, the Ekich is an amazing piece of work. Well designed and well-executed. That said I can't abide them! They "feel" really odd to me. I eventually realised that the reason is the "bullet" is at 90 degrees to what I am used to. This means the spool sits at 90 degrees to what I am used to in my hand. I could eventually get used to it but I see no reason to. The other thing is it costs a lot of money to solve a problem I don't have. It is no faster tying with an Ekich, than a standard bobbin for me. I rewind the excess thread from the whip finish in one swift movement rolling the spool down my thumb. This takes no more time than taking the spool off the pin to release the spring. Then, of course, there is the re-threading of the bobbin when you let go of the thread at the wrong time. Something you will do often even when used to the Ekich. I use both the Nor Vise and a standard vice (either LAW or HMH) depending on the job (kind of flies) at hand. I don't use the Nor Bobbin on my standard vices. I have tried and find no great advantage to it. I do have a technique of rewinding the thread by rolling it down my thumb and can manage 4 or 5 inches in one swift movement. That is enough for almost all my tying. Where it isn't, doing it twice is a very quick movement and not worth the £100 it costs above the price of my most expensive bobbins, to save the little effort required. Of course, you may feel differently. Your tying might benefit from what the Ekich offers. It is, as I have said a quality piece of engineering, and no doubt will serve you well. To me it is pointless. Cheers, C.
  3. Colin, try something proven to be up to the job. Statue to them at Speanbridge. https://www.ebay.co.uk/itm/Genuine-British-Military-Green-Cold-Weather-Headover-Cap-Comforter-NEW/401937817892?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D61046%26meid%3D9a11dbdded424da8978d624be128a83a%26pid%3D100005%26rk%3D1%26rkt%3D12%26sd%3D401394356755%26itm%3D401937817892%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851 Cheers, C.
  4. Yesterday I started the biggest challenge I think I have ever faced. Since I was 14 or 15 (I'm now 56) I have been complaining of back and joint pain. "Get on wi' it, there's nowt wrong wi' you." Has been the reaction. Well this year I discovered why I was in pain. I have ankylosing spondylitus, an inflammatory type of arthritis that starts in your teenage years. The result is that vertebrae T1 to T12 are all fused into two solid lumps. My spine has been broken above and below these fused vertebrae. Yesterday I went in to a physiotherapy rehabilitation for two weeks of intensive physio and hydro therapy. My goal is that I will be able to get out fishing after this. I haven't been able to go at all this year because of this. The damage is not limited to my spine. That is just a major area of concern. The damage now is done, and cannot be undone. Physio will be a part of my life for as long as I want to be mobile. My plea to you is, if your children are complaining of pain, don't dismiss it out of hand. Find out what the cause is. Early intervention will help. It can save a lot of suffering. Regards, C.
  5. Crackaig

    Mayflies

    Can’t be that bad if the cars are still running. We get the famous midge hatches so thick they clog up car engines. Every last one of them, it seems, has been kitted out by Hilti. Cheers, C,
  6. Accidents happen, I have had braided loops come adrift in the past. I think it is important to be able to make adequate running repairs to your equipment as far as is reasonable. In short any competent angler IMO should be able to make a line to leader connection whilst on the water. If your connection involves heat shrink tubing and whippings then you are not going to be able to make a new connection while on the water. I use a knotless tapered leader inserted into the end of the line and superglued. I cannot do this "on the water" but I can still tie a nailless nail knot if needed. No one wants to have their day's fishing curtailed because of a leader / line connection failure. Make sure you can fix this when it happens... No matter what system you choose. Cheers, C.
  7. Look this is really really simple and was fully explained by Douglass Adams in the 1970's. We live in an infinite universe, We know though that not all planets are inhabited. Therefore, there are a finite number of people. Any finite number divided by infinity equals zero. If the average population of the universe is zero, then the actual population of the universe must also be zero. Therefore, anyone you meet is the product of a deranged imagination. I don't know about you but I find this a great reassurance with all the stupid people I meet from day to day. ;P Cheers, C.
  8. That's easy. I'm surprised no one has got it. It is a UTC bobbin. The bobbin holder it is in though, I haven't a clue. Cheers, C.
  9. This all seems rather strange from here. If you were to hit pause and count the how many flies each fly angler had on his cast at any point across the countries of the UK you would probably get an average of two point something each. Most common would be three. Almost all still water competition fishing is done with 3 flies. Most anglers on the lochs will have three flies on. A few may have four. Probably a higher number will have two than four. North country wet flies (the original soft hackles) were traditionally fished in casts of ten or more flies, though the norm these days is three. The various techniques that could be labeled together as "modern nymphing" use a minimum of two flies, frequently three. Again the average would be over two. Using a single fly is usually reserved for the few dry fly only streams, usually, but not always, chalk streams (spring fed). The real reason for the restriction is they wouldn't want some northern oik to arrive and literally hoover up all the fish. That is why it sounds so strange that this debate is even happening. It is accepted fact that a team of flies fished together amounts to more than the sum of its parts. At least here it is. Cheers, C.
  10. Hope you are back on your feet soon Mike. Most importantly, hope it doesn't cut into your fishing time.
  11. It is such a nice fly Sandan We'll have it. In fact you all have done great with it. I'm not surprised that someone has done something similar, for me to do an international swap is a bit ambitious, not to mention slow and expensive. I got the idea from a feature on BBC Radio, there it was a chain of connected songs. Thanks everyone. Cheers, C.
  12. Something I read elsewhere has got me thinking. It might be fun to try to make a "fly chain" starting with the simplest of flies then changing one material and / or adding one material each "link" to see where we end up. To take part... Only recognised / published fly patterns. Post a picture of the fly and a materials used list (The usual convention is to list the materials in the order they are tied in) Change one material and / or add or remove one material, from the latest fly, to make the next fly in the chain. (Total 2 changes max) I'll start this one with Marian Fratnik's F-Fly, perhaps the simplest of dry flies. Hook: Any dry fly, size as appropriate (picture shows a #14). Thread: Black. Body: Thread. Wing: CdC Feather tips. Feel free to start your own "fly chain" for streamers, or wet flies, or you could base it on one material, perhaps pheasant tail, or deer hair. Remember start simple so there is chance for the chain to grow. Cheers, C.
  13. Don't make the mistake of getting a fall front desk instead. It defeats the object as you have to clear everything away. Also get one you can reach all the storage from your seat. I was lumbered with completely the wrong kind of desk by a well meaning friend. Really is a pain, will be firewood soon. Cheers, C.
  14. In the nicest possible way I don't know nor care. People have shared what they know about fly tying with me. I have tried to share what I have learned, and am still learning, with others. Often something I put out to help one person, who has asked, will, I hope, help others. I've no idea who has taken this furthest. Those I have learned from have given their knowledge freely, I just try to pay what I owe them forward. Cheers, C.
×
×
  • Create New...