LisaLou 0 Report post Posted December 26, 2023 Very nice. I would like to suggest a tool I personally use for needlework for at least a decade or more. It is a tiny latch hook. The great part is the latch is actually spring loaded, You can push it through your work, snag your thread. The latch closes as you draw it through your work, not snagging on all the other material as an open hook would. Once you clear the work, the latch pops open once the pressure is off. I included the refill in the picture so the name is there. I’m sorry the pic is dark. It was hard not getting glare off the metal hook or plastic bag. I wanted to show how truly tiny this hook is. Some beads fits right over it, making it easy to put a bead on the hook, then grab a thread and pull it through the bead, adding a bead for an eye. You can see the latch is sticking out 90 degrees or more, including the ones in the refill package. That is the normal position, from the spring holding it open. Clover 9900 Kantan Couture Bead Embroidery Tool on Amazon, there is a short video showing how the tool works, and probably on YouTube, too. That would make more sense than what I tried to explain. it is very handy and holds up well. I think in ten or so years, I’ve replaced the hook part twice because the spring broke, and did a lot of tambour style embroidery with it, along with tons of crochet finishing, You could use the handle to hold a sewing needle for a pick, so it could do double duty. best regard, LisaLou Quote Share this post Link to post Share on other sites
cphubert 0 Report post Posted December 26, 2023 7 hours ago, LisaLou said: suggest a tool Thank you, LL. I always wondered where they got those hopper leg tools, I just ordered a few refills on Amazon. Quote Share this post Link to post Share on other sites
Mark Knapp 0 Report post Posted December 26, 2023 12 hours ago, LisaLou said: Very nice. I would like to suggest a tool I personally use for needlework for at least a decade or more. It is a tiny latch hook. The great part is the latch is actually spring loaded, You can push it through your work, snag your thread. The latch closes as you draw it through your work, not snagging on all the other material as an open hook would. Once you clear the work, the latch pops open once the pressure is off. I included the refill in the picture so the name is there. I’m sorry the pic is dark. It was hard not getting glare off the metal hook or plastic bag. I wanted to show how truly tiny this hook is. Some beads fits right over it, making it easy to put a bead on the hook, then grab a thread and pull it through the bead, adding a bead for an eye. You can see the latch is sticking out 90 degrees or more, including the ones in the refill package. That is the normal position, from the spring holding it open. Clover 9900 Kantan Couture Bead Embroidery Tool on Amazon, there is a short video showing how the tool works, and probably on YouTube, too. That would make more sense than what I tried to explain. it is very handy and holds up well. I think in ten or so years, I’ve replaced the hook part twice because the spring broke, and did a lot of tambour style embroidery with it, along with tons of crochet finishing, You could use the handle to hold a sewing needle for a pick, so it could do double duty. best regard, LisaLou Thank you, Lisalou. Quote Share this post Link to post Share on other sites
Poopdeck 0 Report post Posted December 26, 2023 Fly tying leg tool otherwise known as knitting machine needles and knit pickers. Good for PT fibers not so good for biots. Good old forceps best for biots. https://www.amazon.com/Knitting-Machine-Needles-Durable-Accessories/dp/B07ZVPKB5B/ref=asc_df_B07ZVPKB5B/?tag=hyprod-20&linkCode=df0&hvadid=532826631987&hvpos=&hvnetw=g&hvrand=3796389369506988244&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9007206&hvtargid=pla-1427313654452&psc=1&mcid=10c625e2a679378496f1e1138b3401ab&gclid=EAIaIQobChMImL3CxdytgwMVEkRyCh1iRg3CEAYYASABEgKcrfD_BwE https://www.joann.com/knit-picker-3in-latch-hook-tip/2614774.html?utm_source=google&utm_medium=organicshopping Quote Share this post Link to post Share on other sites
flytire 0 Report post Posted December 27, 2023 here is a post from 2009 on this forum for knotting biot fibers for legs the original post used a bodkin but later in the posting a knit picker was used. 😁 Knotted Biot Technique. - The Fly Tying Bench - Fly Tying (flytyingforum.com) Quote Share this post Link to post Share on other sites