Obi 0 Report post Posted April 3, 2013 Hi everybody! Does anyone here prepare his rigs at home upfront and then carry them ready-made to the water when you go out fishing? I was thinking about rigs other than a simple tapered leader for dry-fly-fishing. You know, rigs for multiple nymphs, czech or french leader, rigs for dry fly/nymph combinations and such ........ ? Out of curiosity: Which types of rigs do you prepare upfront? And more importantly: How do you store your ready-made rigs in order to avoid terrible tangling. Just think about a leader for multiple nymphs and such things......... The benefit of preparing upfront is quite abvious - it sure safes a lot of time at the riverside. Thanks, Obi Quote Share this post Link to post Share on other sites
shoebop 0 Report post Posted April 3, 2013 I've thought about it but what do you do with them once they are tied up? Now you have a snag waiting to happen...unless you have a snell keeper. 3-4 ft. of line with 2 or 3 hooks attached is hard to stow away safely. The snell keeper is not a bad idea though. Quote Share this post Link to post Share on other sites
Obi 0 Report post Posted April 3, 2013 Dear shoebop, Thank you very much for your reply! Since I am not a native speaker: Could you kindly explain what a snell keeper is? And you are right - we are probably not talking flies already tied onto the leader. Cheers, Obi Quote Share this post Link to post Share on other sites
shoebop 0 Report post Posted April 3, 2013 I knew I should have included a photo in my first post. You could have several setups with 2-3 flies tied up and ready to fish. Quote Share this post Link to post Share on other sites
Piker20 0 Report post Posted April 3, 2013 Yes Obi. Find your nearest shop that stocks coarse fishing pole equipement and buy a tray of pole winders. They are great for nymphing rigs where you know the length you are wanting to afix to your fly line. Also handy for 3 fly loch rigs where again you know the length. Quote Share this post Link to post Share on other sites
Bryon Anderson 0 Report post Posted April 4, 2013 I have never pre-rigged at home, both because I lack that kind of foresight but moreso because I actually enjoy the process of rigging up streamside. Part of the pleasure of fly fishing, for me, is the equipment itself. I like uncasing the rod and fitting the pieces together, stringing it up, straightening the leader, perusing the fly box and waiting for inspiration to strike, and all that. I like to go and have a look at the water first, if possible, to get an idea of how I should rig, too. No point tying on a dry fly only to go and find the river 2 feet higher than its normal stage and looking like chocolate milk, and so forth. I've found that hopping out of the car and rushing down to the water with my line already in the air has rarely yielded me good results. If my fishing time was going to be so limited that 5 or 10 minutes given over to rigging is going to be an issue, I would probably wait and go when I had more time. Quote Share this post Link to post Share on other sites
flytire 0 Report post Posted April 4, 2013 rigging up on stream doesnt take up much time in the grand scheme of fly fishing so thats what i prefer if you really feel the need to pre rig dropper leaders, orvis has the box for you http://www.orvis.com/store/product.aspx?pf_id=76kh Quote Share this post Link to post Share on other sites
ditz2 0 Report post Posted April 6, 2013 I rig at the creek most of the time but I do pre-rig once in a while. I have a plastic bed liner in my small truck and I sometimes just lay the assembled rod in the bed and drive the 2 miles to the creek. It takes me longer to get to the water than to drive to the creek. It also takes me about 15 seconds to get my outfit together and head to the door with my stuff. The longest job is to fill my water bottle. Quote Share this post Link to post Share on other sites
cmb18895 0 Report post Posted April 7, 2013 pre rig in winter only have to tie one knot in the coid Quote Share this post Link to post Share on other sites
Obi 0 Report post Posted April 10, 2013 Hi everybody, thanks a bunch for your comments! The hints on tray winders is very helpful! I see your points about rigging up at the waterfront. You are rigt, part of the fun is taking care of your gear. On the other hand, there is no way that I tye a complete rig with dropper tags and such when I am already out for fishing. I'm far too nervous then - the adrenaline starts to kick as soon as I see the first rise..... :-) Cheers, Michael Quote Share this post Link to post Share on other sites
flytire 0 Report post Posted April 11, 2013 On the other hand, there is no way that I tye a complete rig with dropper tags and such when I am already out for fishing. I'm far too nervous then - the adrenaline starts to kick as soon as I see the first rise..... :-) Cheers, Michael but thats when you take the time to observe whats happening rather than jumping in at the first rise you see http://midcurrent.com/techniques/reading-the-water/ Quote Share this post Link to post Share on other sites
dontheo 0 Report post Posted April 13, 2013 I too think rigging at the water is part of the fun. But I have been considering pre tying some smaller flys on ahead of time due to sight issues, 20 and smaller on 8x for example. I have not tried it yet but I think it might have some merit. My normal procedure is to take off my expensive sun glasses and try to store them without scratching them or smudging them. I have used flip down magnifiers on ball caps and magnification glasses. Both are a pain to keep from smudges. Plus, I like a full brim hat so there goes the flip downs. I really like fishing small so I might try this. Unless I guess the length of the Tippett correctly and loop it, I am still going to struggle tying it on. I use furred leaders with loops in the ends which may help. Maybe a Monical like Capt Klink had on Hogans heros? Quote Share this post Link to post Share on other sites
ditz2 0 Report post Posted April 15, 2013 Why struggle with this quandry?......Do both like me. It just depends on where and what mood I am in. I sure ain't gonna lose any sleep over it. Quote Share this post Link to post Share on other sites
dontheo 0 Report post Posted April 15, 2013 Ditz: What is the best wat to straighten the tippet once you roll it up? Shit, I don't sleep anymore so I can't lose any. There's nothng to lose. Quote Share this post Link to post Share on other sites
ditz2 0 Report post Posted April 15, 2013 I fish warm water and I almost exclusivly use 6# tippet. I just grab each end of the tippet and stretch it and it straightens out OK. At one time I carried a small patch of tire inner tube to pull the mono thru and it works well also. I have trouble getting enough stretch on heavy mono 15# and over. For this, the patch works better. Quote Share this post Link to post Share on other sites