Dux-R-Us 0 Report post Posted June 23, 2016 I have found that by adding a few wraps of lead to the hook helps Perfect Poppers sit better in the water; helps put hook in fish's bite zone and the added angle in relation to surface really allows the bug to POP! Before this my Perfect Poppers did not POP as well. Tally ho! ********************************************** "Hope burns always in the heart of a fisherman." - Zane Grey Quote Share this post Link to post Share on other sites
FlaFly 0 Report post Posted June 24, 2016 I've seen a lot of guys post that the pop isn't important. I can't say one way or the other. But I'm curious as to whether you get more bites with the tail down, and if it affects the hook set. Quote Share this post Link to post Share on other sites
Bimini15 0 Report post Posted June 24, 2016 I wonder if riding low like that also may give it some side to side action. Any observations? Quote Share this post Link to post Share on other sites
Hatchet Jack 0 Report post Posted June 24, 2016 Wondering if a slightly larger hook (longer shank, deeper gape) would effectively accomplish the same thing as your lead wraps? Quote Share this post Link to post Share on other sites
Stippled Popper 0 Report post Posted June 24, 2016 Are you using the hooks sold with Perfect Poppers? Here are two images of Perfect Poppers in a bowl of water all using hooks sold with Perfect Poppers. The first image shows a #8 and #6 in the Upper Right and a #8 cork bodied on the Lower Left. The second shows a #4. If not adjusted for with the tailing, they basically float like a buoy without adding any additional weight. Quote Share this post Link to post Share on other sites
Bimini15 0 Report post Posted June 24, 2016 Does that make it a Tenkara popper? Quote Share this post Link to post Share on other sites
mikechell 0 Report post Posted June 24, 2016 After tying on tail material, do those flies still sit like that, Stippled? Quote Share this post Link to post Share on other sites
Stippled Popper 0 Report post Posted June 24, 2016 After tying on tail material, do those flies still sit like that, Stippled? Not if you use something that adds buoyancy such as deer hair. The problem with the Perfect Popper tied as a popper is that at the rear there is little buoyancy to support the exposed hook. Turn the body around into a slider and you would need to add something to the tail so they will not float parallel to the water's surface. Note the difference in the floating attitude of the cork body. Quote Share this post Link to post Share on other sites
Philly 0 Report post Posted June 25, 2016 I use the soft foam popper bodies and a longer shank fine wire hook. I use a lot of 2 or 4XL dry fly hooks, Aberdeen style crappie hooks to tie them with. Without the wrapped hackle and marabou tail the body sits at an angle somewhere between the cork body and Perfect Body popper. When I tie in the hackle and marabou tail the popper will sit pretty level in the water. As far as the popping action goes, I think it depends on where you position the hook. The lower the hook sits in the body the less popping action you'll get with a cupped face popper. As far as far as a side to side action, if the hook eye is in the center of the popper it's very difficult to get a side to side action unless you manipulate the rod. If you offset the hook eye to the right or left of center then you do get a side to side action when you retrieve. Quote Share this post Link to post Share on other sites
Saltybum 0 Report post Posted June 25, 2016 In studying the Pole Dnacer popper I do believe that a combination of both the added weight and the shape of the head lend to it's side to side or walking the dog action. I have tied a couple, three of them and it was tricky getting the lead wire just right so as not to sit too deep but tail down enough for the right action. My first one must have been pretty good because some salty toothy critter stole it first time out. Quote Share this post Link to post Share on other sites
Chris Hansen 0 Report post Posted June 30, 2016 I tie all my poppers on tubes and then dress the hooks (generally marabou with some weight usually a bead) I find I get much better hook ups this way. Could be the orientation - or could be that the hook slowly sinks a bit away from the popper after each twitch. Quote Share this post Link to post Share on other sites