Oliver47 0 Report post Posted February 14, 2017 Hello Yesterday a friend of mine gave me a few flies one of which being a parachute adams. However the parachute adams he gave to me (and tied himself) had the post clipped almost flush with the hackle. He told me he tied them this way because with the taller post the fly would always land on its side. So my questions are, does the post serve a function other than just being a sighter? Does a shorter post help the fly land correctly more often? Do any of you guys tie you parachute flies with small posts? Quote Share this post Link to post Share on other sites
Jaydub 0 Report post Posted February 14, 2017 A longer wing (shank length) can be seen by the trout and the angler. So I see it as serving two purposes. If the wing is not overly long and the hackle isn't too short, the fly should land upright most of the time. Quote Share this post Link to post Share on other sites
SilverCreek 0 Report post Posted February 14, 2017 The parachute adams is actually a stage 3 emerger pattern. The fly is supported by the hackle that is ABOVE the fly body so the fly body is IN and NOT ON the FILM. Dry fly bodies lie on the film and emerger bodies are in or under the film The post represents the emerging body and wing of the insect. The post is required for the parachute adams and should NOT be cut off. See the explanation by Gary Borger. http://www.garyborger.com/2016/09/09/parachute-flies-stage-3-emerger/ So the fly requires a post to properly imitate that stage of emergence. See Also: "There's a reason that the Parachute Adams is one of the most popular "dry" flies of all time: it more accurately represents a mayfly nearing the end stages of emergence than it does your typical high-floating dun with hardened wings" http://www.hatchmag.com/articles/few-thoughts-fishing-emergers/7711160 For more information read Fishing the Film. https://www.amazon.com/Fishing-Film-Fly-Book/dp/0962839272 Quote Share this post Link to post Share on other sites
mikechell 0 Report post Posted February 14, 2017 While not disagreeing with anything said above ... if the fish hit it, no, the post isn't needed. If he gave them to you to fish, go for it. If you see fish in the water, and they are snickering and pointing at the fly, then yes, the post is needed. Quote Share this post Link to post Share on other sites
flytire 0 Report post Posted February 14, 2017 good answers from jaydub abd silver creek Quote Share this post Link to post Share on other sites
Bruce Norikane 0 Report post Posted February 22, 2017 ... the post clipped almost flush with the hackle. He told me he tied them this way because with the taller post the fly would always land on its side. So my questions are, does the post serve a function other than just being a sighter? Does a shorter post help the fly land correctly more often? Do any of you guys tie you parachute flies with small posts I've never had a problem with parachute flies landing on their side. For me that's a great benefit of parachute style over collar wrapped flies. A tall post imitates either a wing or the emerging insect, and it is very valuable to help you see the fly. Quote Share this post Link to post Share on other sites
Crackaig 0 Report post Posted February 22, 2017 The problem of flies lying on their side gave me some trouble a few years back. The solution I adopted was never to make the post longer than the RADIUS of the hackle (note I said radius not diameter.) this way the hackle has the mechanical advantage over the wing. This problem even affected Klinkhammers, which sit even lower in the water. On a Klikhammer the hackle should be submerged, with just the post above water. Through careful observation I discovered that it was not how the fly landed that was the problem, but that it was being blown over after landing. Now I supply all parachutes with the wing post trimmed to this height, if you want them shorter you can trim them; they haven't invented an adding on tool yet. Cheers, C. Quote Share this post Link to post Share on other sites
shoebop 0 Report post Posted February 22, 2017 I was going to say the same thing as Crackaig...only a little differently...that is to say that some folks use too small of a hackle for their parachutes. When tying a size 16 parachute I use a size 14 hackle or even a size 12 on occasion. That will keep them upright! In my way of thinking, these flies can represent a spinner very well and the extra length of the hackle looks like the wings laying flat on the water surface. Just my 2 cents... Quote Share this post Link to post Share on other sites
SilverCreek 0 Report post Posted February 22, 2017 ^^^ I also upsize the hackle by one size. I have used them as a spinner pattern by cutting off the post and trimming the hackle fore and aft. Quote Share this post Link to post Share on other sites
Dave G. 0 Report post Posted February 22, 2017 I use the post itself and gauge the hackle to reach close to the bend of the hook shank. It sounds like too big of a hackle but with tails on it looks fine and floats well, performs well overall ( for me, but I don't tie to win beauty contests and this is quick easy gauging, basically the post and hackle have the same length reach from the center of the post, very stable). Quote Share this post Link to post Share on other sites
ralphs007 0 Report post Posted February 22, 2017 For more information read Fishing the Film. https://www.amazon.com/Fishing-Film-Fly-Book/dp/0962839272 I listened to his pod cast about Fishing the Film last night at www.AskAboutFlyFishing.com, It was very interesting and I'm tempted to get the book. Quote Share this post Link to post Share on other sites
Flat Rock native 0 Report post Posted February 23, 2017 Thanks for some great advice folks Quote Share this post Link to post Share on other sites